You have NO WAY of knowing whether YOUR theory is correct! He planned this murderous rampage and that means he would have procured the means by ANY means.
The carrier is adjustable. There's a couple of screws under the shell plate that after everything is loosened you can try and rotate the carrier a degree or two, but you really need the alignment tool.
I've been using the Tempilaq 750 degree to establish an accurate reliable baseline for time/temp settings. As far as empirical evidence that my efforts are being rewarded; I haven't loaded any yet, but when I do, I will post my results.
Hey dragon; here's the video you must have missed concerning "timing" of the rollers. https://www.youtube.com/watch?v=bXNWDx1SpVI&feature=youtu.be
BTW, I almost bought the Annealeez, but for the same money, I don't have to swap rollers if I want to run 300 blackout or swap rollers to process my...
1TwistedGimp; first off, I haven't read this entire thread, so what I'm about to say might be old news.
The very first thing you need to do is slug you barrel. If you've done that then you know the bore diameter as well as the size of bullet you need to be shooting( 1 to 2 thousandths over...
You didn't watch Annealeez's youtube video, did ya? Clearly warns about misalignment when changing the roller(s); could really mess up the timing. 300 Blackout is why I got this Annealer.
That is, unless you have a misalignment issue. Might be a minimal chance, but Murphy is always lurking around.
Also, the Annealeez costs almost as much as the MRB if you need to do smaller brass, i.e. you have to buy their kits.
CMD
I think they ALL look similar, it's the engineering behind the facade that makes the difference. I like the Giraud Annealer a lot, I couldn't swing the shot to my wallet. I looked at the Annealeez Annealer and didn't like the "changing of the Delrin rollers" aspect to run smaller or larger...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.