mrstang01
Member
Besides Oly, is anybody currently producing a 10mm Carbine?
Thanks,
Michael
Thanks,
Michael
10 MM Carbines?
- Thread starter mrstang01
- Start date
- Status
Dionysusigma
Member
Ohio Rapid Fire RF 10:
Feed: Magazine (30)
Operation: Delayed Blowback
Caliber: 10mm
Weight: 5.59lbs w/ fake suppressor 6.59lbs)
Width: 1.96"
Height: 8.26"
Barrel Length: 5.59" (16.5" with fake suppressor)
Retail: Call for Price and Availability
Paddle Mag Release: $125.00
http://www.ohiorapidfire.com/hk.htm , about 1/3 of the way down the page.
Feed: Magazine (30)
Operation: Delayed Blowback
Caliber: 10mm
Weight: 5.59lbs w/ fake suppressor 6.59lbs)
Width: 1.96"
Height: 8.26"
Barrel Length: 5.59" (16.5" with fake suppressor)
Retail: Call for Price and Availability
Paddle Mag Release: $125.00
http://www.ohiorapidfire.com/hk.htm , about 1/3 of the way down the page.
Lennyjoe
Member
Dionysusigma, you are an evil man. Thanks for posting that. Now I have to dream about that for months before I can raise the money to get one.
jeff-10
Member
Everytime there is a manufacturer wish list thread on THR a 10mm carbine always comes up. Unfortunately I don't think there are many options for a 10mm carbine other than the Olympic Arms AR or some of the exotic/custom stuff like the the MP10 clone posted above.
Zach S
Member
I've heard AO made a few 10mm Thompsons, however they're few and far between.
Other than Oly Arms or something exotic like the RF10 above the only thing I can think of is a Mech Tech CCU, which of course needs a pistol to work.
Other than Oly Arms or something exotic like the RF10 above the only thing I can think of is a Mech Tech CCU, which of course needs a pistol to work.
The RF10 has a list price over $6000.
Vector Arms will be selling MP5 clones in .40 S&W, .357 SIG and 10mm:
Estimated price $1500
http://www.vectorarms.com/
Vector Arms will be selling MP5 clones in .40 S&W, .357 SIG and 10mm:
Estimated price $1500
http://www.vectorarms.com/
Last edited:
Lennyjoe
Member
Well, maybe I wont get one of these. I aint that rich.
Thats a little easier to handle price wise. Maybe an upper for my oly would be the cheapest way for this broke Tech Sgt to go.
Too Many Choices!?
Member
- Joined
- Feb 21, 2005
- Messages
- 763
Is this true?
I was told you could shoot .40 S&W through a 10mm all day with no ill effects? Are the bullets the same with a different case like .38 and the .357 or something ? I have a friend with a Colt Delta Elite in 10mm and he said it shoots .40S&W just fine....
If this is the case, since I have a Glock 23(.40S&W), I might have to treat my self to a Christmas Carbine in 10mm and have a good compatable Carbine/handgun combo.....
I just better not mix the 10mm and .40cal ammo up in the Glock
!!!!
I was told you could shoot .40 S&W through a 10mm all day with no ill effects? Are the bullets the same with a different case like .38 and the .357 or something
? I have a friend with a Colt Delta Elite in 10mm and he said it shoots .40S&W just fine....If this is the case, since I have a Glock 23(.40S&W), I might have to treat my self to a Christmas Carbine in 10mm and have a good compatable Carbine/handgun combo.....
I just better not mix the 10mm and .40cal ammo up in the Glock
!!!!Too Many Choices!?
Member
- Joined
- Feb 21, 2005
- Messages
- 763
On those MP5 clones....
That price better include the $200 tax stamp to SBR that dang thing!
I still want one though ...
That price better include the $200 tax stamp to SBR that dang thing
!I still want one though
...
jobu07
Contributing Member
Christ man! For the prices RF is asking, where do they get off asking $125 for a paddle mag release? Wow... But still... One can dream
Langenator
Member
The only 10mm firearm that should be used to fire both 10mm and .40S&W is the S&W 610 revolver.
You might be able to actually do it with other guns, but the round won't have headspaced properly due to the difference in case length.
But yes, they use the same bullets, since the .40 resulted from the 10mm being too much for some limp wristed FBI agents to handle.
You might be able to actually do it with other guns, but the round won't have headspaced properly due to the difference in case length.
But yes, they use the same bullets, since the .40 resulted from the 10mm being too much for some limp wristed FBI agents to handle.
Hey guys
I just was looking at the OLY Arms 10mm aswell .....but mag situation is kinda grimm....only 10rd mags and only from OLY Arms......anyone know of another mag option if I get the PCR10.....I just dont want to be limited to 10rd and only one supplier that charges $65 a mag?????
a 5 digit refund this year and want somthing special.................
My own special wait 3 years for refunds to build up gun buying program.... 
Rusher
I just was looking at the OLY Arms 10mm aswell .....but mag situation is kinda grimm....only 10rd mags and only from OLY Arms......anyone know of another mag option if I get the PCR10.....I just dont want to be limited to 10rd and only one supplier that charges $65 a mag?????
a 5 digit refund this year and want somthing special.................
My own special wait 3 years for refunds to build up gun buying program....
Rusher
mrstang01
Member
That's why I wanted to avoid Oly.
Have good news
Hey Guys
This just in..........
Dear Olympic Arms
Since you only offer uzi converted 10rd mags for the K10..........can I send you uzi 32rd or 20rds mags for you to convert.......or any other options you could provide would be greatly appreciated.
Thanks
Robert M Hiatt
Their reply
Yes you can send them in,This is a 25.00 a peace(his spelling not mine) to modify them .Thanks Jared
Jared Balmer
Domestic Sales Rep.
Olympic Arms Inc.
800-228-3471 Order Line
360-459-7940 General Info
360-491-3447 Fax
www.olyarms.com
[email protected]
Hey Guys
This just in..........
Dear Olympic Arms
Since you only offer uzi converted 10rd mags for the K10..........can I send you uzi 32rd or 20rds mags for you to convert.......or any other options you could provide would be greatly appreciated.
Thanks
Robert M Hiatt
Their reply
Yes you can send them in,This is a 25.00 a peace(his spelling not mine) to modify them .Thanks Jared
Jared Balmer
Domestic Sales Rep.
Olympic Arms Inc.
800-228-3471 Order Line
360-459-7940 General Info
360-491-3447 Fax
www.olyarms.com
[email protected]
mrstang01
Member
What caliber UZI mags would you use? This might make the Oly upper a bit more appealing!
BlackCat
member
bump
As long as the thread is bumped anyway...
I talked to Vector yesterday and they said they expect to start shipping the carbines possibly in July. They sell the rifles with a barrel extension attached to the end. That way if you want a SBR you can have a gun smith modify the barrel when you get your paperwork approved and pay the tax. Saves the roughly 6 month wait for the gun. They are also selling a pistol version that will not require the tax stamp but will not have a sholder stock.
Enjoy.
I talked to Vector yesterday and they said they expect to start shipping the carbines possibly in July. They sell the rifles with a barrel extension attached to the end. That way if you want a SBR you can have a gun smith modify the barrel when you get your paperwork approved and pay the tax. Saves the roughly 6 month wait for the gun. They are also selling a pistol version that will not require the tax stamp but will not have a sholder stock.
Enjoy.
Got the MechTech here, with glock - for $650-$700 ish, you can have a pistol and a rifle. But it's straight blowback, not a locked breech action of some sort, so this may sacrifice some performance via unburned powder out the bolt before the bullet has exited, though I'm guessing this is fairly insignificant in the grand scheme of things.
Ivy Mike
Member
http://www.mechtechsys.com
The Carbine Conversion Unit sounds like the low priced alternative to spending a fortune on an MP5 wanna-be.
The Carbine Conversion Unit sounds like the low priced alternative to spending a fortune on an MP5 wanna-be.
I went the Oly route using modified 20-round Uzi .41 AE mags and a modified Colt one-piece 9mm mag block. Works fine, but I think if I were going to do this again I'd use the new Cav Arms lower that is designed to work with M3 Greasegun mags.
Olympic Arms 10mm Carbine Project
- Status
