List your sub-MOA factory fodder

Status
Not open for further replies.
Ruger 77 in .243, shooting Winchester Super-X 100 grain power points. Rifle shoots 5 shot groups at 100 yards that a quarter will cover, center to center.
 
Rifle: Les baer super varmint .204
ammo: hornaday factory 32G .5 moa or less
Hornaday 40g .75 moa
Rifle: Ruger M77 all weather 300 wm loves 180 remy corlocks shoots right around 1 moa.
Weatherby acumark 338-378 with weatherby factory 250 partition shoots 1moa for 3 shots but opens up fast when it gets warm.
 
I like small caliber rifles but have always had to tinker with them or handload to get true sub MOA. Almost unbelieveable to me the only rifle ammo combo that I ever had that delivered sub MOA was a box stock Ruger 77 in 300 win mag and red box 180 gr Federal ammo.

I bought the rifle when I lived in Alaska and picked up 4 boxes of the cheapest ammo the store had for initial sight in and for brass. Right out of the box I shot a 3 shot 3/4" 100 yard group. The groups opened up to about 1 " when measuring 5 shots.

I marred up the stock on that gun hunting on a costal Island and sold it....I still kick myself in the ass for that.
 
Dr. Tad - I don't have the time or inclination anymore to reload, and I shoot ONLY factory ammo these days. Virtually ALL of my rifles shoot sub-moa with factory ammo -- because I won't own a rifle that won't -- and because I took the time to do extensive testing to find a load that each rifle likes. Some examples in terms of calibers, loads and best 3-shot groups: 22-250, Fed V-Shock 55-grain Ballistic Tip, 0.28 in.; 257 Wby Mag, Wby 120 grain Nosler Partition, 0.73 in.; 270 Win, Win Power Point 130 grain, 0.69 in.; 308 Win, Fed Fusion 165-grain, 0.68 in.; 300 WSM, Winchester XP3 150 grain, 0.75 in.; 338 Fed, Fed TSX 185 grain, 0.46 in. These are just a few examples. I don't believe there's any shortage of sub-moa rifles or factory ammo. You just have to put in the effort and time to find the optimum load for each rifle. I'm fortunate in that I have certain relationships with most of the ammo makers, otherwise this could get expensive. With my newest .308 (Kimber Montana), for example, I had to test eight factory loads before I found one that would shoot sub-moa consistently. Some brands/weights would barely group within 3 inches. Other rifles, like my 22-250, are inherently accurate. I've only tested three factory loads in that particular gun because ALL THREE shoot sub-moa consistently.
 
Remington 700 ADL synthetic in .308 with a Millet TRS-1 for optics and Remington Premier 168gr BTHP Match rounds. I average around 0.66MOA but there was one time I got it to shoot as good as 0.4.
 
My Savege 10 in .223 will shoot 5 shot groups that I can cover with a quarter. I've done it with a few different ammo types that were out of the box @ Wal Mart.

The Savage even out shot my CZ 527 varmint in .223 which has a superior trigger compared to the Savage. I suspect the CZ doesn't like the bulk ammo and it has a faster twist rate than the savage as well so it might like the lighter loads in it.
 
weatherby super varmintmaster with umc 22-250 45 grain bullets,consistant under 1moa,& hk sl8-1 with 75 grain hornady hangs in around the moa mark,had one group of under 1/2,could never do it again.....
 
Remington 700 VLS with Remington 700 LTR barrel.

Remington core lokt 150 grain. .25 at 100

winchester silvertip 150 grain. .25 at 100, 1.5 at 425.

remington 150 grain ball. .75 at 100
 
Mossberg ATR-100 .30-06
Federal 168-Gr "Gold Medal Match"
5 shots, 0.69" @ 100Yds

{My rifle, but NOT my hands holding it...was being shot by a retired Marine}
 
Status
Not open for further replies.
Back
Top