Remage or Savage

[Bfh_auto]

I loaded a starting charge of IMR4064 under a bulk 62 grain bullet. The first shot was the high left one. The other 4 were inside .52" the first shot made it 1.27".

 

[Legionnaire]

Looks promising!

 

[Bfh_auto]

Looks promising!

Yes sir. I'm waiting on my Lapua brass to shoot good bullets. I also need to get a longer cleaning rod. So 5 shots was all I got to do.

 

[troy fairweather]

How's H380 with the heavy bullets, it's good in the 22-250 that's how it got its name 38.0 grains was the sweet spot when they were developing it.

good for the first group, it may take some shoots to settle in, by time you fireform that lapua should be good togo.

 

[Bfh_auto]

How's H380 with the heavy bullets, it's good in the 22-250 that's how it got its name 38.0 grains was the sweet spot when they were developing it.

good for the first group, it may take some shoots to settle in, by time you fireform that lapua should be good togo.

In my other gun. I got an extra hundred feet per second and better groups with IMR4064.
I also buy it by the keg.
I'm leaning towards 4350 burn speed from the data I've been seeing.

 

[LoonWulf]

In my other gun. I got an extra hundred feet per second and better groups with IMR4064.
I also buy it by the keg.
I'm leaning towards 4350 burn speed from the data I've been seeing.

The 4350s were where it it was at for my .250ai. u may see some improvements going even slower.

At least with the heavies

 

[Bfh_auto]

Breaking this barrel in has been a slow progress.
First my cleaning rod was only 26". Then my wife's coworker got hurt so she picked up several extra patients.
I got to slip out and shoot another 5 shot group. This time it was a 52 grain load I quit using in 2012.
It took about 15 patches to clean the copper out.

 

[Bfh_auto]

I have a 20 round ladder loaded using SW4350 and 70 Gr RDF bullets.
I started low and may be pulling bullets. But I wanted to be sure I have the ladder covered.