What about PRVI brass?

[Marty B]

I'm in need of 100 pieces of 7x57 brass and found PRVI PARTIZAN at Grafs. Has anyone used this brass? How would it compare to Winchester or Remington? Is there anything I need to know about it? Any opinions on it would be appreciated.

Thanks,
Marty

 

[DIM]

I'm working on 308 once fired cases, they seemed to be better then Rem or Win brass I previously used, it's slighter thicker brass then the others +0.002", I'll try to hit the range today then I will post my results...

 

[Hondo 60]

I have about 500 Prvi cases for .38 special. I've reloaded them at least 5 or 6 times each. No problems - I'd highly recommend them.

 

[rondog]

PRVI is supposed to be some of the best brass out there, from what I've read.

 

[ScratchnDent]

I have 200 pieces of it in 7.5 Swiss. I am happy with it!

Some of it has been fired 5 times now, full length resized every time, and I've not had any failures. Primer pockets are still good and tight, no excessive case head expansion.

I wouldn't hesitate to buy it again.

 

[moxie]

Great stuff. I believe Hornady uses it for their metric line, including old stuff like Japanese rounds for the WW II Akasura.

 

[DIM]

OK here it is PPU brass I load for 308 I think its not bad, but not Lapua

 

[qajaq59]

I used it for quite a spelll when I was shooting my Swiss K 31. it was ok. I never had any problems with it.

 

[Marty B]

Thanks all for the help. It's for a hunting rifle so with the info i've gotten so far it should work o.k. I'll look for some Win or RP once fired a little while but if I don't find any I may try the PRVI.

Thanks again,
Marty

 

[Runningman]

I used Prvi Partizan brass in 6.5x55 and 9.3x62, worked fine for me.