I would appreciate any help or Input on sight adjustment on series 70 colt nib. vismc star pistol sight vise is what im looking to use. Been loading lead swc w/ MBC 200 gr. w/BE and 45 odd ball 200 @ 5.7/5.6 do very well like the old military round. Really $ wise should i just adjust the sight...
Hey fellas, been awhile hope alls well. Had a bunch going on w/life. Getting back in the the cave and going to set up the SDB. I useally create the load on my T-7 that being said. looking for a were to order and what you might have loaded in the past? Thank you JOHN! Want to try a dewc style...
I have got a lot of help prior on our our G. S. forum/thanks fellas! as I reload and had replaced parts) b.bushing wolf spring kit etc.. looking for a barell that's a good one for an e z r feed for this oldie! Any input would be cool! Midway is were I would like to find one but?
Let me ask this at what length do you stop and put your brass in the recycle bin? Loading for a 686 s&w 4 inch barrel. I know I can trim down for 38. but have plenty.
Always wanted one. very mixed views. some good /better reviews w/ some newer brand names. This will be my first riffle caliber to reload w/ T-7 TURRET REDDING PRESS. After 3+ years of loading for pistol its time to take on bottle neck. Any input would help! I believe I could load a good round!
Picked one up to replace one I should have never got rid of! @ 15+ yds. steel plate drift a lil. right and pretty dern good. After having and loading for the G42 pico bersa wow like it was before w/w231 and a rmr 100g. fp. nice. Anyone favor there's and load for it some?
hd extractor ser 70 .45 no cut for fp stop. My colt 45 is a colt gov. mod. mk iv/series 70 can I use this? I feel bad about returning something I orderd,
its on me. My fault its not similar don't look the same and im new to .45 and tweaking them but learning. And EGW is my go to. Any help would...
1.125/1.120 coal/oal for g43 9mm. any ideas as I have a top end load at pretty much max that's good. Looking back on my notes cfe pp. was very good w/them and my cz 75d. from w/a oal that fit both and I also used w231, cfe being the best but that was a gimme from a good source that had...
I purchased a nib. 45 COLT not used. I want to load for it but want to re-place this part before I shoot. Any help would be appreciated. I see a lot of older info but I haven't found any updated? Ed Brown/mid-way/ brownels/ or file on it? Not big on altercations. Thank
you John.
Going back to the books. w/a 9mm/115gr fmj rn hornady. and most likely w231powder charge maybe unique. I had 300 rnds. In stock. Before I move back to plated. New gun have to know what it s capable of.
4.6/4.7g at 1.080 best @10 yds can clover leaf high left. but can not shed the powder burn on outside of spent case. At max. and using sdb/t/7 turret. Is a spent case w/dirtier markings after being used an issue. Now I used to praise clean,clean,clean. What am I missing/tightend up w/ss/pin...
Before I order again to organize were supposed to get a new store in town possibley H.F.? Anyhow sml./lrg. accro bins I personally love'em! Anyone have a go to storage unit w/them bins? Smallish would be nice say 4x4?
Anyone been able to get any? I know its the busy season w/deals going on. I don't use them competitively. I had 1500 rnds of Extreme 124 g. hp's I tweeked my t-7 and set my dillion up for, just wondering before I crank out 1500 extremes? I emailed them/and I know that they have to be busy? John
Been trying to get my new gift up and running from Amo-zon. I have a new g43 and want to tweek it w/ some 9mm extrm's hp's/ be/86 had to add that in 124g. hp's . Anyhow its not reading out well w/new batteries. Reviews are great thumbs up!! Anyone like it love it or use it ? I have it replaced...
Picked up a two tone for a present to myself. Was wondering after the G-42 thread if anyone might have carried on caliber wise? Triggers nice,i used facto. armscor 9mm. hp's 124g did well. Then RMR plated 124g fp's w/ BE/86 did good @ 12 yd's but just getting used to. Then banged out some steel...
What is the best way to measure pressure, chrono/ paper print out chrono? Or do the math? I have established loads whit in reason that work the best for each model gun I load for. I have a pro chrony w/out the print out. I wanted to ask before I go back to the books.
I have not searched any future then my town & country LOWEs for a set of allen wrenches but for something like a straight/screw driver like shaft. Would like them for lock rings and other applications, (Redding Horn. dillion on my presses. Found and expensive set for 30$ +. just wondering if...
Hey fellas need help . got a set of used dies off of our BST forum. Took apart /cleaned and need directions for the R/crimp set. Im into loading for a few wheel guns. time to start the learning process of roll crimping as I will move up the ladder of bottle-neck afterwards. Have t-7/Dill. SDB so...
Transparent tubing for powder measure. I saved this as I know I would be needing it from a member of ours that had posted. Any one have any input? Co. USP- United States Plastic Corp. Or any other ideas? Thank You ,John
For the Redding 3BR and 10X.
Before I add another gun in the .45 mix? Any thoughts fellas?Its new its pretty and I sure want it? LGS 750.00 ish? Stainless upper and researched my best all knight so far. Cant be more then a - four# trigger pull nice wood grips? I was going to go $ more but that's were im at. Then I can get...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.