I have one with a "bolt" (cylinder catch) that needs help. The gun works, but you have to be careful as the bolt is short and you can rotate the cylinder clockwise (From the rear) when it is engaged. It won't slip out counter clockwise.
It is too short, shows damage on the top, and may have been welded/refit before (Missing spot/file marks/ugly top). My thought was to weld a bit of metal on the top of it and refit it. Sounds simple enough.
I have some welding and metal working experience, a good eye, a steady hand, and a curiosity killed the cat/I can do it even though I never have before attitude that usually doesn't get me in over my head.
So, what are my options, and what do y'all recommend? Thanks.
It is too short, shows damage on the top, and may have been welded/refit before (Missing spot/file marks/ugly top). My thought was to weld a bit of metal on the top of it and refit it. Sounds simple enough.
I have some welding and metal working experience, a good eye, a steady hand, and a curiosity killed the cat/I can do it even though I never have before attitude that usually doesn't get me in over my head.
So, what are my options, and what do y'all recommend? Thanks.