trigger

I am starting my second AR build. I like the idea of a binary trigger, but I have been doing some research on forced reset and now I am totally confused. Help. Pros? Cons?

I just got my sporterized Mauser torn down. Been able to determine that I have a Mexican 1910 made in 1933. I’m wondering if anyone knows where you can find a composite stock (other than ram line) that fits. I’m hoping to find one with some adjustments as I’m hoping to pass it on to my daughter...

Found this trigger kit in my spare parts. I have no clue what firearm it’s for. Anyone recognize these parts?

I started Cowboy Fast Draw and single actions last year. I purchased a uberti cattleman. After 4 months of practice, the gun would suddenly not stay in full cock. It would drop back to half cock. I did have to move the hammer a bit to get the cylinder to rotate to remove the laser cartridge. So...

I’ll start off by saying I’ve got other binary triggers and I didn’t by it (them) to conserve ammo ... they are obviously for cover-fire or the big grin you get when blasting through a 50 round drum. So, what say y’all that have them in a 10-22, are you pleased with the quality & function? So...

Hi I'm new to your forum. I have the pistol you see in the title in .357 magnum. I have found a few threads about hammer springs but they are not longer accepting comments. I am good with the hammer spring on this gun but the single action trigger pull is very heavy. Like over 8 lbs heavy...

Well, I pulled the trigger :) and bought a binary trigger. For the last 4 years I have regarded these as a gimmick but I finally wanted to see for myself. So, I installed it in an entry level AR that I had bought years ago. It took about 30 minutes to install and function test. There are a...

I recently bought a surplus mosin that was caked in Cosmoline. I took it apart and removed all the Cosmoline and put it back together. However now when the safety is engaged I can still pull the trigger, it doesn’t fire/ do anything. And when the safety is off It fires like normal. I took it...

Hi I have a *FEW of questions regarding my P226. While I ask my two questions I would like to hear more about Sigs from you all as well. Any positive as well as negative experiences with your Sigs please share them. Even if you have any fixes or any techniques that are particular to improving...

A buddy needed to some money and he had a Gen 3 G-17 for sale. The stock sights are pretty terrible so I ordered some Hi-Viz sights. Usually I put Apex triggers in my Glocks but I had wanted to try a Lightning Tap Double Action Trigger. I got in touch with them via facebook and learned that...

Title pretty much says it all. I have a 120 that I wanted to take apart to clean and after I pull the pin out, the trigger assembly seems stuck. It'll wiggle a slight bit but it doesn't want to come out. It is a youth model so I don't know if that makes a difference or not. If anyone has any...

Hello all, I recently sent my M&P9c in for warranty repair. There was some unexplained damage to the part of my slide that pushes the trigger bar out of the way during cycling. It had a great trigger before I sent it in, but they replaced the slide and now my trigger is extremely gritty...

Howdy, I've been saving for a Geissele trigger for my AR for awhile. Originally, I was planning on going for the GS2 because it was the most affordable and then I'd be able to decide if I like the concept of the 2 stage and Geissele in general. Now that I saw the kind of deals they put out...

I’m new to CZ’s and have a recently purchases (new) CZ75B and now have almost 800 rounds through it. At about 500 rounds the trigger pin starting walking out and I replaced it with a CGW floating trigger pin and also changed the trigger return spring to their reduced power version (to make it...

I’m new to the AR building world, and am finishing a build soon. My hang ups are I don’t know which upper to go with, as well as bolt carrier group, or even how much it matters. I’m as of right now thinking I’ll do a bear creek arsenal upper in .223 Wylde with a Nitrid3 Syst3ms bolt carrier...

I have a H&R Model 922 Serial M61231, where the firing pin will not make contact. When I pull the trigger the hammer is about 1/8-1/16" short of making contact. When I depress the sear the hammer will close that gap but the pulling of the trigger does not depress the sear to make that contact. I...

Greetings all, for my first forum post here I am coming to you with a problem plaguing my first handgun. A fair warning first that my camera and lighting are not very good where I currently am, my pictures did not come out great. 20170815_184424 by Kenton38 posted Aug 15, 2017 at 6:37 PM...

Hi all, I just did a trigger job on my semi-auto 12 gauge Turkish shotgun. The pull is just a bit better, but I noticed that when dry-firing there is no longer as much noise or shaking. I did not cut any springs at all, and just polished with fine file and dremel polishing bit the trigger and...

While practicing dry firing (Super Redhawk 7.5"), I've gotten in the habit of tucking my trigger finger behind the trigger between shots instead of extending it above or on the outside of the trigger guard. I imagine it would look weird if I were to do this at the range, especially for people...

At my Winchester 1894 (.30-30) I have a very loose, wobbly trigger, the Winchester is a post 64 manufacture, I mean early 80s, with ejection above (no angle eject). The weapon already has this securing device, which allows the shot only when the repeating lever is slightly pushed up during the...