T,
I've been going thro' all the feedback the last few days and although I can't satisfy everyone's needs, I've narrowed the requirements to the following:
1. Rectangular case that will be high enough to fit an AR with a scope and 30 round mag.
2. Should you remove the scope and mag, you'll be able to mount 2 ARs, butt to muzzle, one on top of the other.
3. PALS webbing inside the main compartment and also inside the outer pocket. No webbing externally.
4. Will offer this case in other colors besides black and khaki including navy, green and possible burgundy.
5. Close cell foam padding of at least 1/2 " on each side to safely protect the rifle plus reduce any signature.
6. Two sets of d-ring mounts for the shoulder strap; one for each one of the case and another on diagonally opposite handle ends.
7. Ballistic Nylon.
8. Optional mag, scope pouches etc, using PALS webbing.
9. Lockable zippers.
10. Will offer in a couple of lengths.
11. 550 cord zipper pulls.
12. Padded non-slip shoulder strap, adjustable on both ends.
Considering a hidden backpack strap system if it is not cost prohibitive and will also sample without the PALS webbing.
I'm quite sure that covers about the gist of what you guys were looking at.
My thanks to everyone for taking the time to out down their thoughts