Malachi Leviticus Blue
Member
The question could also be phrased "Who didn't import them?"...
Agreed, that is a fair statement.
The question could also be phrased "Who didn't import them?"...
We think almost identicalthe Walker, the C-96 Mauser and the Thompson submachinegun with the vertical foregrip are the coolest looking guns ever made
I went out for the first time to experience the whole cap gun thing. I spent the fall/winter cleaning, honing and fixing short arbors on two Walkers a new 1851 and a new1860.
Collected lead, caps and powder and read a good bit of how to. I sent 30 shots through each with good results. No misfires. No binding. They ran as smooth on the last shot as the first.
I think setting the arbors and the cylinder to barrel clearance was key. The cylinder pin was virtually clean.
You also shooting .45 Colt via breech loading and a conversion cylinder in those Walkers? Looks like the recoil shield has been ground out on them for breech loading.
New member here, hi everyoneView attachment 839745 View attachment 839745
That said, mine is Ser.845 and I simply cannot locate ANY other stampings for a date code. Perhaps someone can assist me here.
View attachment 815796 I only found this site this fall when I decided to start shooting my my two uberti walkers as designed, cap n’ ball with black powder.
I was shooting .45 colt cartridges with the Kirst Konvertor installed. I’ve been doing some low level tuning and adjusting on all my c&bs while I collect components. The walkers are a blast to shoot. Welcome.
tks looks like I will be using my diamond files.headspase is .018 and should be 006.NickAlbion there were different "generations" of ASM Walker's, the newer ones looked quite different from the older ones. I suspect that many parts are not interchangeable. Even among ASM Walker's of the same so-called generation the cylinders are not always drop-in's and need to be fit.
As for your question, here are the measurements of my Uberti Walker datecode CM:
2.43" long not including the star.
2.58" total length including the star.
1.87" diameter.